Take Kirby on a flying adventure! This cute little Kirby copter is ready to soar. It comes with the figure, the USB charging cable and a small remote (CR2032 battery not included).

Usage Instructions:

1. Charging:
   Connect the included USB cable to the charging port on the main unit. Full charge takes approximately 30 minutes.

   • Use only the provided USB cable. Power input: DC 5V

   • Ensure the power switch is in the OFF position while charging

   • The internal indicator light will turn on during charging and switch off once fully charged

2. Powering On:
   Slide the switch on the back of the main unit to the ON position. Hold the device horizontally with the propellers facing upward.

3. Launching:
   Aim the remote at the device and press the button. The propeller will begin to spin. Release the unit and it will lift into the air.
   Note: The propeller may begin rotating automatically when the unit is powered on.

4. Obstacle Detection:
   The unit will ascend when it detects an object within approximately 40 cm below it.

5. Landing:
   Press the remote control button again to reduce propeller speed and bring the device back down safely.